Beer Can Hat - Part 2

**Update! April 2022** My first ALL NEW Beer Can Hat Tutorial and video is up!! Woohoo! Many more tutorials coming, this is just the beginning!
 
!!More details and a preview video: 

 

All NEW Beer Can Party Hat Tutorials!!

 

 

(Continued from Part 1) See Crochet Basics for stitch descriptions and abbreviations. 

Note: I used tall cans for my sample hat, adjustments for using regular size cans shown in [brackets].
 

3. Edge the Can Labels

Basically, the cans will be edged just like a granny square. 5 dc into each corner, and 3 dc into each hole along the sides. For those who prefer a written pattern, here you go:

Sl st into corner hole, ch 3 (counts as 1 dc). Work 2 dc into same hole. *Work 3 dc into next hole and each hole across. Work 5 dc into corner hole. Repeat from * around label, ending with 2 dc into starting hole. Sl st into 2nd of ch 2 from beginning. Tie off.




Repeat this for each can label.



4. Join the Labels

This part is a little bit tricky. You will be joining the pieces while holding them back-to-back, one is in Front, one is in Back. The Front label will be worked by inserting your hook from the front, the Back label will be worked by inserting your hook from the back. I find it helpful to hold the Front label a little lower than the Back label while I work.




To join these, we will use a sort of joined sc, hdc, and dc to get an A-line shape to our hat. I can't describe it much better than that, so I'll defer to my written pattern instructions:

A) Starting in the top left corner of Front label, sl st into 3rd of 5 dc. Insert hook into same st, *yo and draw a loop, insert hook into corresponding st of Back label, yo and draw a loop (3 lps on hook), yo and draw a loop through all lps on hook. Insert hook into next st on Front label. Repeat from * across next 5[2] sts (6[3] sts total).

**Yo, insert hook into next Front st and draw a loop, yo, insert hook into corresponding Back st and draw a loop. Yo and draw a loop through all 5 lps on hook. Repeat from ** for next 2[5] sts (3[6] sts total).

***
Yo, insert hook into next Front st and draw a loop (3 lps on hook), yo and draw a loop through 2 lps on hook. Yo, insert hook into corresponding Back st and draw a loop, yo and draw loop through 2 lps on hook (3 lps on hook). Yo and draw lp through all lps on hook. Repeat from *** across, working last st into 3rd of 5 dc in corner. Tie off.



Repeat from A) until all labels are joined together.


If you want to stop here with the Beer Can Crown, simply sc along the top and bottom edges to finish, covering the yarn ends as you go. Boom, done.


Or, stay tuned for Part 3 finishing the hat top and brim.

Comments

  1. Very nicely done - thank you for the directions. My ex daughter in law actually asked for one of these!!

    ReplyDelete

Post a Comment

Popular posts from this blog

Beer Can Hat - Part 1

Beer Can Hat – Part 3